@import((rwml-menu))
  • Blasting Machines
  • THC-90 & THC-10 | Tochu Hand Cabinet

    THC-90 & THC-10 | รุ่นแรงดันลม

    THC-90 & THC-10 | Tochu Hand Cabinet

    THC-90 & THC-10 | Máy phun tay

    Copyright © John Smith, All Rights Reserved.
    Copyright © John Smith, All Rights Reserved.

    Technology

    Airblasting
    Airblasting
    Suitable in cases in which only small surface areas have to be target blasted or in which the complicated workpiece shapes do not allow wheelblasting. All metallic and nonmetallic abrasives can be used in these machines and suction or pressure blast systems are also available.
    Copyright © John Smith, All Rights Reserved.

    Abrasives

    Steel Shot

    Steel Shot

    Steel Grit

    Steel Grit

    Stainless
    Steel Shot

    Stainless Steel Shot

    Cut Wire

    Cut Wire

    Aluminium Oxide

    Aluminium Oxide

    Glass Beads

    Glass Beads

    Plastic Media

    Plastic Media

    Ceramic Beads

    Ceramic Beads
    Copyright © John Smith, All Rights Reserved.

    Workpiece Samples

    THC Parts
    Copyright © John Smith, All Rights Reserved.

    เทคโนโลยี

    Airblasting
    การพ่นโดยใช้แรงดันลม
    เหมาะสำหรับการพ่นชิ้นงานที่มีพื้นที่ขนาดเล็ก เฉพาะเจาะจง หรือ ชิ้นงานที่มีความซับซ้อน ที่ไม่สามารถใช้ กับเครื่องแบบแรงเหวี่ยงได้, ซึ่งสามารถใช้เม็ดขัดผิวโลหะทั้งแบบที่เป็นโลหะและไม่ใช่โลหะกับเครื่องขัดผิวโลหะทั้งที่เป็นชนิดลมดูดและแรงดันลมสูง.
    Copyright © John Smith, All Rights Reserved.

    เม็ดขัด

    เม็ดเหล็กแบบกลม

    Steel Shot

    เม็ดเหล็กแบบเหลี่ยม

    Steel Grit

    ผงสแตนเลส

    Stainless Steel Shot

    อลูมิเนียมคัตวายร์

    Cut Wire

    อลูมิเนียมออกไซด์

    Aluminium Oxide

    ทรายแก้ว

    Glass Beads

    พลาสติก

    Plastic Media

    เม็ดเซรามิค

    Ceramic Beads
    Copyright © John Smith, All Rights Reserved.

    ตัวอย่างชิ้นงาน

    THC Parts
    Copyright © John Smith, All Rights Reserved.

    Teknologi

    Airblasting
    Airblasting
    Cocok untuk pekerjaan untuk memblasting area permukaan yang kecil atau benda kerja dengan bentuk yang rumit yang tidak dimungkinkan dengnan menggunakan proses wheelblasting. Semua abrasive logam dan abrasive non logam dapat digunakan dengan mesin airblasting jenis ini. Tersedia dalam jenis system udara hisapan dan system udara bertekanan.
    Copyright © John Smith, All Rights Reserved.

    Abrasif

    Steel Shot

    Steel Shot

    Steel Grit

    Steel Grit

    Stainless
    Steel Shot

    Stainless Steel Shot

    Cut Wire

    Cut Wire

    Aluminium Oxide

    Aluminium Oxide

    Glass Beads

    Glass Beads

    Plastic Media

    Plastic Media

    Ceramic Beads

    Ceramic Beads
    Copyright © John Smith, All Rights Reserved.

    Sampel Benda Kerja

    THC Parts
    Copyright © John Smith, All Rights Reserved.

    Công nghệ

    Airblasting

    Máy phun khí

    Phù hợp trong các trường hợp diện tích bề mặt vật cần gia công nhỏ hoặc cấu trúc của vật cần gia công phức tạp không thể dùng đến máy phun cát. Có thể sử dụng các chất mài mòn kim loại và phi kim loại trong các loại máy này với hệ thống hút hoặc phun áp lực cũng có sẵn.

    Copyright © John Smith, All Rights Reserved.

    Chất mài mòn

    Bi sắt

    Steel Shot

    Mạt sắt

    Steel Grit

    Bi thép không gỉ

    Stainless Steel Shot

    Dây thép cắt nhỏ

    Cut Wire

    Aluminium Oxide

    Aluminium Oxide

    Bi thủy tinh

    Glass Beads

    Vật liệu bằng nhựa

    Plastic Media

    Bi thạch anh

    Ceramic Beads
    Copyright © John Smith, All Rights Reserved.

    Miếng công tác mẫu

    THC Parts
    Copyright © John Smith, All Rights Reserved.
    THC Treatment
    The Tochu Cabinet Type THC features the latest Airblast technology. Our suction blast cabinets (in case of the THC-10 Model a pressure blast version can be supplied) provide a high-performance surface preparation solution that achieves a smooth and beautiful finish. The environmentally friendly, pollution free design ensures the operators health and at the same time provides our customers with an extremely cost efficient solution. Application fields include the cleaning, descaling, etching and cosmetic surface finishing of various workpieces, e.g. automotive parts, alloy wheels, gears, moulds, stained glass etc. A wide range of abrasives can be used, such as steel shot, aluminium oxide, cut wire and glass beads.
    • Environmentally friendly
    • Compact machine design
    • Convenient machine operation
    • High visibility of workpiece during blasting
    THC Treatment
    เครื่องพ่นทรายด้วยแรงดันลม ผลิตด้วยเทคโนโลยีที่ทันสมัย มีคุณสมบัติในการขัดทำความสะอาดผิวโลหะได้สะอาด เรียบเนียนและสวยงาม อีกทั้งยังประหยัดค่าใช้จ่ายและไม่ก่อให้เกิดมลพิษต่อร่างกายและสิ่งแวดล้อม เครื่องขัดผิวรุ่นนี้เหมาะสำหรับทำความสะอาดอะไหล่ชิ้นส่วนยานยนต์ เฟือง ล้อแมกซ์ งานแม่พิมพ์ทุกชนิด และงานทำลวดลายบนกระจกใส ฯลฯ โดยสามารถใช้ได้กับผงขัดทุกชนิด ไม่ว่าจะเป็นผงเหล็ก อลูมิเนียมออกไซด์ อลูมิเนียมคัตวายร์ ทรายแก้ว เป็นต้น
    • เป็นมิตรต่อสิ่งแวดล้อม
    • ขนาดตัวเครื่องกะทัดรัด ประหยัดพื้นที่ใช้งาน
    • ง่ายต่อการควบคุม
    • สามารถมองเห็นชิ้นงานระหว่างกระบวนการขัดผิวได้
    THC Treatment
    Mesin Tochu Cabinet Type THC memiliki fitur teknologi Airblast terbaru ruang hisap Blasting (dalam kasus Model THC-10 versi Blasting bertekanan dapat diberikan) memberikan kinerja yang tinggi, solusi untuk persiapan menghasilkan permukaan halus dan indah. Ramah lingkungan, desain bebas polusi menjamin kesehatan operator dan pada saat yang sama pelanggan diberikan solusi dengan biaya yang rendah . Aplikasi bidang ini termasuk pembersihan, kerak, etsa dan finishing permukaan berbagai benda kerja, misalnya suku cadang otomotif, velg, roda gigi, cetakan, kaca bermotif dll .Berbagai macam abrasive dapat digunakan, seperti steel shot, aluminium oxide, cut wire dan glass beads.
    • Ramah lingkungan
    • Desain mesin Compact
    • Mesin mudah dioperasikan
    • Benda kerja terlihat jelas selama blasting
    THC Treatment
    Máy phun tay Tochu THC được sản xuất theo công nghệ thổi hơi tiên tiến nhất. Thùng hút phun của máy (đối với máy THC-10 loại phun áp lực có thể được cung cấp ) tạo ra giải pháp xử lý bề mặt có hiệu quả cao đạt được được bề mặt trơn và đẹp. Với thiết kế thân thiện, không gây ô nhiễm môi trường, đảm bảo sức khỏe của người vận hành máy đồng thời đem lại hiệu quả kinh tế cho khách hàng. Thiết bị này được sử dụng nhiều để làm sạch, tẩy bề mặt, tạo nhám, tạo bề mặt theo yêu cầu của các miếng công tác như các chi tiết phụ tùng ô tô, các vành hợp kim, bánh răng, khuôn mẫu, kính mờ … Có thể sử dụng nhiều loại vật liệu dùng để làm sạch như bi sắt, aluminum oxit, mạt sắt,bi thủy tinh
    • Thân thiện môi trường
    • Thiết kế gọn
    • Dễ sử dụng
    • Dễ quan sát vật công tác trong quá trình phu bắn
    Copyright © John Smith, All Rights Reserved.
    THC-90 Photo

    THC-90

    THC-90 Video Link
    THC-10 Photo

    THC-10

    THH-10CY Video Link

    Model Type

    THC-10

    THC-90

    Max. width of workpiece

    500 mm

    400 mm

    Max. height of workpiece

    400 mm

    300 mm

    Diameter of table

    800 mm

    -

    Max. weight of workpiece

    400 kg

    40 kg

    Lighting

    2 x 60 W

    2 x 60 W

    Nozzle diameter

    9 mm

    9 mm

    Air consumption

    35.5 cfm at 6 bar

    35.5 cfm at 6 bar

    Total power requirements

    1 Hp (0.75 Kw)

    0.5 Hp (0.35 Kw)

    Machine dimensions

    A

    B

    C

    D

    2000 mm

    1300 mm

    2600 mm

    750 mm

    900 mm

    1200 mm

    2000 mm

    -

    รุ่นเครื่องจักร

    THC-10

    THC-90

    ความกว้างสูงสุดของชิ้นงาน

    500 mm

    400 mm

    ความสูงสูงสุดของชิ้นงาน

    400 mm

    300 mm

    เส้นผ่าศูนย์กลางโต๊ะ

    800 mm

    -

    น้ำหนักสูงสุดของชิ้นงาน

    400 kg

    40 kg

    โคมไฟส่องสว่าง

    2 x 60 W

    2 x 60 W

    เส้นผ่าศูนย์กลางของหัวพ่นทราย

    9 mm

    9 mm

    ปริมาณลมที่ใช้

    35.5 cfm at 6 bar

    35.5 cfm at 6 bar

    กำลังไฟฟ้าสูงสุด

    1 Hp (0.75 Kw)

    0.5 Hp (0.35 Kw)

    ขนาดเครื่องจักร

    A

    B

    C

    D

    2000 mm

    1300 mm

    2600 mm

    750 mm

    900 mm

    1200 mm

    2000 mm

    -

    Tipe Model

    THC-10

    THC-90

    Max. lebar benda kerja

    500 mm

    400 mm

    Max. tinggi benda kerja

    400 mm

    300 mm

    Diameter meja

    800 mm

    -

    Max. berat benda kerja

    400 kg

    40 kg

    Penerangan

    2 x 60 W

    2 x 60 W

    Diameter nozzle

    9 mm

    9 mm

    Konsumsi udara

    35.5 cfm at 6 bar

    35.5 cfm at 6 bar

    Total kebutuhan daya

    1 Hp (0.75 Kw)

    0.5 Hp (0.35 Kw)

    Dimensi Mesin

    A

    B

    C

    D

    2000 mm

    1300 mm

    2600 mm

    750 mm

    900 mm

    1200 mm

    2000 mm

    -

    MODEL MÁY

    THC-10

    THC-90

    Chiều ngang max của vật công tác

    500 mm

    400 mm

    Chiều cao max của vật công tác

    400 mm

    300 mm

    Đường kính bàn quay

    800 mm

    -

    Trọng lượng max của vật công tác

    400 kg

    40 kg

    Đèn

    2 x 60 W

    2 x 60 W

    Đường kính vòi phun

    9 mm

    9 mm

    Lưu lượng khí

    35.5 cfm at 6 bar

    35.5 cfm at 6 bar

    Tổng công suất thiết kế

    1 Hp (0.75 Kw)

    0.5 Hp (0.35 Kw)

    Kích thước máy

    A

    B

    C

    D

    2000 mm

    1300 mm

    2600 mm

    750 mm

    900 mm

    1200 mm

    2000 mm

    -

    THC-90

    THC-90 Drawing

    THC-10

    THC-10 Drawing
    Copyright © John Smith, All Rights Reserved.
    Copyright © John Smith, All Rights Reserved.